Electronic tensile machine is widely used in the detection of luggage

Tianhui's electronic tension machine can be widely used in various rubber and plastics, footwear, leather, clothing, textiles, insulators, terminals, etc., testing its tensile, tearing, peeling, bending and other materials. R & D, inspection and testing, full-featured and versatile.

(1) Travel Luggage

Samples with a length greater than 100 mm and a width greater than 20 mm on both sides of the main suture surface of the soft box or travel bag are taken. When clamping, hold the seam of the lamb against the jaw of the clamp. Open the electronic tension machine , the stretching speed is 100 mm/min, and the two fabrics tested until the two pieces of the fabric are broken and broken. The actual zui value of the tensile testing machine is the peak value and the intensity.

(2) carry on suitcase

The suture strength test of the back bag: take two pieces of the stitching fabric on the main part of the back bag, the area is 60 mm*60 mm, the upper and lower clamps are 50 mm wide, and the depth is (30±2) mm. The tensile speed is tested by the tensile machine. 100±10) mm/min, until the break (wire or fabric), the result is low value of zui. If the material testing machine shows that the value exceeds the specified value of the stitching strength and the sample is not broken, the test can be terminated.

(3) Briefcase

Bonding strength test of the briefcase: Take two pieces of the same type of fabric in the briefcase, the area is 120 mm*60 mm (as indicated by the standard of QB/T1332-1991). The sample is made according to the same type of glue-bonding process. The clamp has a clamping capacity of 50 mm and a depth of (29 ± 2) mm. The tensile speed was measured by an electronic tensile machine at a tensile speed of 100 mm/min. (as indicated by the QB/T1332-1991 briefcase standard).